P2710

P2710: Shift Solenoid F Intermittent

DIY difficulty 5/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The F shift solenoid circuit works intermittently - shifting problems may come and go.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 9 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Research Technical Service Bulletins for the specific vehicle by year, model, and transmission. Tests: Dirty or clogged transmission filter
  2. Check vehicle records to verify the last time the filter and fluid were changed.
  3. Make sure the fluid level is correct and inspect the fluid condition for contamination. Tests: Insufficient fluid level
  4. Perform a thorough visual inspection of associated wiring for scraping, rubbing, bare wires, or burn spots - pay attention to spots that move or flex.
  5. Check all connectors and connections (to the transmission solenoids, transmission pump, and PCM) for security, corrosion, and damaged pins.
  6. Perform a wiggle test on the harness while watching the solenoid circuit with a scanner or meter to catch the fault.
  7. Note when the fault occurs (hot, cold, on bumps) - intermittent faults often correlate with heat or vibration.
  8. Inspect the transmission linkage for security and binding issues.
  9. Advanced diagnosis needs a digital multimeter and the vehicle-specific troubleshooting chart (voltage requirements vary by year and model). Perform continuity checks with power removed - normal wiring/connections should read 0 ohms.

Typical price range

Parts$60 – $800
Labor$150 – $1500

Fluid/filter service or shift solenoid replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2710 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

5 of 5 — Intermittent faults are the hardest to pin down - wiggle tests and heat-soak testing help, but the fault may hide during testing.

Parts & tools

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →