Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeNot severe - it will likely only affect PTO/auxiliary equipment functions, not regular driving.
The power take-off indicator light circuit has a fault - the auxiliary equipment may be disabled.
Model notes: This code only appears on vehicles equipped with a power take-off system (trucks, work vehicles) - it does not apply to passenger cars without PTO.
Key facts
P260D means pto Engaged Lamp Control Circuit. The power take-off indicator light circuit has a fault - the auxiliary equipment may be disabled. WrenchFair's published fair-price range for this repair is $10–$150 parts and $100–$300 labor at independent shops.
WrenchFair rates P260D a 3-of-5 DIY difficulty (“Lamp, fuse, and wiring checks are easy DIY; tracing the lamp control circuit needs a multimeter and service data.”) with a “Drive safe” driveability rating: Not severe - it will likely only affect PTO/auxiliary equipment functions, not regular driving. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
PTO engaged lamp does not illuminate
auxiliary PTO equipment will not function
check engine light illuminated
Likely causes
Fault in PTO lamp control circuit
Faulty or damaged wiring
Corroded, damaged, or loose connector
Defective fuse or fusible link (if applicable)
Defective PCM
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 7 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Research Technical Service Bulletins for the specific vehicle by year, model, and engine/transmission configuration.
Check whether the PTO engaged lamp illuminates at key-on and note its behavior.
Inspect the lamp/bulb and its socket.
Check associated wiring for scraping, rubbing, bare wires, or burn spots.
Check all connectors and connections (including to the PCM) for security, corrosion, and damaged pins.
Verify whether a fuse or fusible link is incorporated into the circuit and test/replace as needed.
For advanced diagnosis, use a digital multimeter with the specific technical references for the vehicle to check voltage and resistance in the lamp control circuit.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$10 – $150
Labor$100 – $300
Bulb, fuse, or wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P260D ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Lamp, fuse, and wiring checks are easy DIY; tracing the lamp control circuit needs a multimeter and service data.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →