P255D

P255D: Pto Speed Selector Sensor/switch 2 Circuit High

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The second PTO speed selector signal is stuck too high - your dump bed or plow will not work.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Research Technical Service Bulletins for the specific vehicle year, model, and engine/transmission configuration.
  2. Locate all components of the PTO speed selector 2 circuit and inspect wiring for scraping, rubbing, bare wires, or burn spots. Tests: PTO speed selector switch failure
  3. Check all connectors and connections for security, corrosion, and damaged pins, including PCM connectors. Tests: Corroded, damaged, or loose connector
  4. Check the fuse or fusible link in the circuit. Tests: Short to power in the circuit
  5. With a digital multimeter and the specific technical references, test the PTO speed selector sensor/switch 2.
  6. If wiring and sensor are good, have a qualified shop test the PCM.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$40 – $300
Labor$100 – $300

PTO speed selector sensor/switch replacement or wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P255D ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Wiring inspection under the chassis, fuse check, and connector cleaning are DIY; PCM diagnosis is shop-level.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →