P2558

P2558: Engine Coolant Level Sensor/switch Circuit Low

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The coolant level sensor signal is stuck too low - check the coolant level first, then the sensor wiring.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 7 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. With a cold engine, check the coolant level in the reservoir and radiator and top up with the correct coolant. Tests: Low engine coolant level
  2. Look for coolant leaks under the vehicle and around hoses, the radiator, and the water pump. Tests: Defective coolant level sensor or switch
  3. Research Technical Service Bulletins for the specific vehicle year, model, and engine/transmission configuration.
  4. Locate the coolant level sensor or switch (coolant reservoir, overflow bottle, or radiator) and inspect its connector and wiring for damage, corrosion, shorts to ground, and loose pins. Tests: Faulty or damaged coolant level sensor/switch wiring
  5. Check the fuse or fusible link in the circuit.
  6. With a digital multimeter and the specific technical references, test the coolant level sensor/switch.
  7. If wiring and sensor are good, have a qualified shop test the PCM.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$30 – $150
Labor$80 – $250

Coolant level sensor/switch replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2558 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Checking coolant level and inspecting sensor/wiring in the reservoir are DIY; PCM diagnosis is shop-level.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →