Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonSevere - insufficient lubrication can cause permanent internal engine damage very rapidly. Check oil before driving.
The engine computer says the oil level is too low - add oil and find out why it is low (a leak or burning oil), or the engine can destroy itself.
Model notes: Applies to Honda, Acura, Volvo, Fiat, Kia, and others.
Key facts
P250F means engine Oil Level Too Low. The engine computer says the oil level is too low - add oil and find out why it is low (a leak or burning oil), or the engine can destroy itself. WrenchFair's published fair-price range for this repair is $20–$250 parts and $40–$200 labor at independent shops.
WrenchFair rates P250F a 1-of-5 DIY difficulty (“Checking and topping off oil and looking for leaks is basic DIY; sensor replacement and circuit testing are intermediate.”) with a “Diagnose soon” driveability rating: Severe - insufficient lubrication can cause permanent internal engine damage very rapidly. Check oil before driving. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
engine may not start
low oil pressure gauge reading
service engine soon light illuminated
check engine light illuminated
Likely causes
Low engine oil level (most likely)
Oil leak (external or internal consumption) 4 owner notes link this repair to P250F
Defective oil level sensor
Dirty or clogged oil pressure sensor
Faulty or damaged wiring
Corroded, damaged or loose connector
Defective fuse or fuse-able link (if applicable)
Defective PCM (rare)
Owner notes linked to P250F: 5 across 2 repairs — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 7 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
The first critical step is to check the engine oil level and condition and top it off to the appropriate level. Tests: Low engine oil level (most likely)
Investigate why the oil is low - look for leaks under the engine and signs of oil consumption; fix the underlying cause, not just the level. Tests: Oil leak (external or internal consumption)
Research Technical Service Bulletins for the specific vehicle by year, model, and powertrain.
Locate all components of the oil level sensor circuit and look for obvious physical damage. Tests: Defective oil level sensor
Perform a thorough visual inspection of associated wiring for scraping, rubbing, bare wires, or burn spots; check connectors for security, corrosion, and damaged pins.
Consult the specific tech data to verify the oil level safety circuit configuration and see if a fuse or fuse-able link is incorporated.
Test the circuit per vehicle technical data; repair faulty wiring or replace the oil level sensor if it fails testing.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $250
Labor$40 – $200
Oil change/top-off or oil level sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P250F ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
1 of 5 — Checking and topping off oil and looking for leaks is basic DIY; sensor replacement and circuit testing are intermediate.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →