P2404: Evaporative emission system leak detection pump sense circuit range/performance
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeEmissions-only fault. Safe to drive - fix at your convenience (often just the gas cap).
The little pump that pressure-tests your fuel vapor system for leaks isn't working right. The car drives fine - it just can't run its vapor-leak self-check.
VW/Audi note (VCDS): Run the EVAP service test with the scan tool and listen at the pump location; silence with good wiring condemns the pump.
Model notes: The leak detection pump only runs during self-tests, so it can fail silently for months - this code is often the first sign. It will not leave you stranded.
Key facts
P2404 means evaporative emission system leak detection pump sense circuit range/performance. The little pump that pressure-tests your fuel vapor system for leaks isn't working right. The car drives fine - it just can't run its vapor-leak self-check. WrenchFair's published fair-price range for this repair is $15–$80 parts and $0–$180 labor at independent shops.
WrenchFair rates P2404 a 3-of-5 DIY difficulty (“The pump is usually near the tank or canister; diagnosis is electrical plus a functional test.”) with a “Drive safe” driveability rating: Emissions-only fault. Safe to drive - fix at your convenience (often just the gas cap). These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
failed emissions test
no drivability symptoms
Likely causes
Failed leak detection pump (most common)
Corroded connector at the pump
Damaged wiring
Stuck pump from debris or corrosion
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Locate the pump and check its connector for corrosion Tests: Corroded connector at the pump
Command the pump with a scan tool and listen/feel for operation
Test pump resistance against spec
Replace the pump if it does not run with good power and ground
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $80
Labor$0 – $180
Gas cap is under $25; smoke test plus hose/valve runs more. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2404 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The pump is usually near the tank or canister; diagnosis is electrical plus a functional test.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →