P2280: air flow restriction/air leak between air filter and MAF
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonSeverely diminished performance and engine may shut off on acceleration; rectify as quickly as possible.
The engine is not getting enough air between the air filter and the mass airflow sensor - usually a clogged air filter or a collapsed/cracked intake pipe.
Model notes: Applies to Dodge, Ram, Audi, Chevrolet, Ford, GMC, Jeep, and other 1996-newer vehicles.
Key facts
P2280 means air flow restriction/air leak between air filter and MAF. The engine is not getting enough air between the air filter and the mass airflow sensor - usually a clogged air filter or a collapsed/cracked intake pipe. WrenchFair's published fair-price range for this repair is $20–$100 parts and $0–$100 labor at independent shops.
WrenchFair rates P2280 a 2-of-5 DIY difficulty (“Checking and replacing the air filter is easy; inspecting the inlet pipe requires only basic hand tools.”) with a “Diagnose soon” driveability rating: Severely diminished performance and engine may shut off on acceleration; rectify as quickly as possible. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
severely diminished engine performance
engine may shut off upon acceleration
backfires upon acceleration
accompanying misfire codes
Likely causes
Clogged air filter element
Torn or collapsed air inlet pipe
PCV breather tube removed from air inlet pipe
PCM or programming error
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Research technical service bulletins for the specific vehicle first.
Inspect the air filter element; if excessively dirty or clogged, replace it and test-drive to see if symptoms subside. Tests: Clogged air filter element
Check the air inlet pipe for kinks, cracks, or signs of collapse; replace with an OEM part if damaged. Tests: Torn or collapsed air inlet pipe
If MAF codes accompany the P2280, inspect the MAF sensor hot wire for debris and clean only per manufacturer recommendations.
Retrieve all stored codes and freeze frame data, record them, then clear codes and test-drive until readiness or the code resets.
If the code resets, test the MAF and MAP sensors per manufacturer specifications using the DVOM, then test system circuits.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $100
Labor$0 – $100
Air filter and/or air inlet pipe replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2280 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Checking and replacing the air filter is easy; inspecting the inlet pipe requires only basic hand tools.
Pro tip: Relieve fuel pressure first (pull the pump fuse, run the engine until it stalls). Work cold, battery disconnected, extinguisher within reach — no power tools near open fuel.
As an Amazon Associate, WrenchFair earns from qualifying purchases.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →