P2231

P2231: O2 sensor signal circuit shorted to heater circuit bank 1 sensor 1

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The upstream O2 sensor on bank 1 has a short between its signal circuit and its heater circuit - it is reading battery voltage instead of exhaust oxygen.

Model notes: Common on VW, Kia, Peugeot, BMW, Cadillac, Holden, Honda, Ford.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Retrieve all stored codes and freeze frame data; clear the codes and test drive.
  2. Perform a visual inspection of HO2S related wiring and connectors - replace cut, burned, or damaged wiring. Tests: Burnt, chafed, broken, or disconnected wiring or connectors
  3. Start the engine, allow it to reach normal operating temperature, and observe oxygen sensor input data on the scanner. Tests: Defective oxygen sensor
  4. If the HO2S displays battery voltage or no voltage, use the DVOM to obtain live data from the HO2S connector. Tests: Burnt, chafed, broken, or disconnected wiring or connectors
  5. If the output data remains the same, suspect an internal HO2S short and replace the sensor.
  6. Consider a faulty PCM or programming error only after the sensor and wiring check out.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$50 – $200
Labor$50 – $150

Oxygen sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2231 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Visual inspection and O2 sensor replacement are intermediate work; DVOM signal testing requires electrical familiarity.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: O2 sensors: typically 35–50 Nm (26–37 lb-ft) — verify spec. A dab of nickel anti-seize on the threads; keep it off the sensor tip.

Pro tip: Route the new sensor’s harness exactly like the old one — melted wires on the exhaust are the number-one comeback.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →