Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonRunning rich wastes fuel and can damage the catalytic converter over time - diagnose within a reasonable time frame.
The engine is running too rich at higher load on bank 2 - too much fuel, not enough air.
Model notes: Common on European and Asian fuel-injected vehicles since 2010, including VW, Audi, Mercedes, BMW/Mini, Hyundai, Mazda, Kia, and Infiniti. Code P2192 is the same code for Bank 1.
Key facts
P2194 means system too rich at higher load bank 2. The engine is running too rich at higher load on bank 2 - too much fuel, not enough air. WrenchFair's published fair-price range for this repair is $50–$300 parts and $100–$300 labor at independent shops.
WrenchFair rates P2194 a 3-of-5 DIY difficulty (“Inspecting sensors and connectors is DIY-friendly; fuel pressure and sensor circuit testing is intermediate.”) with a “Diagnose soon” driveability rating: Running rich wastes fuel and can damage the catalytic converter over time - diagnose within a reasonable time frame. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
lack of power
occasional misfire
poor fuel economy
Likely causes
Faulty bank 2 air/fuel ratio sensor (AFR/O2)
Faulty mass airflow sensor (MAF)
Fuel system issue - fuel pressure, fuel pressure regulator, or leaking fuel injectors
EVAP system issue including canister purge regulator valve
Rarely - faulty PCM
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 7 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check for technical service bulletins for your vehicle.
Diagnose any fuel or fuel system related codes first - misdiagnosis can occur otherwise. Tests: Fuel system issue - fuel pressure, fuel pressure regulator, or leaking fuel injectors
Locate the bank 2 AFR/O2 sensor and MAF sensor; visually inspect connectors and wiring for chafing, corrosion, or bare wires. Tests: Faulty bank 2 air/fuel ratio sensor (AFR/O2)
Clear the codes and see if P2194 returns - if not, connections were likely the problem.
Test the MAF sensor signal voltage against manufacturer specifications; replace if it fails.
Monitor the AFR/O2 sensor; if it continually indicates rich, investigate fuel pressure, fuel pressure regulator, injectors, and EVAP purge valve.
Suspect the PCM only after all other issues are eliminated.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $300
Labor$100 – $300
MAF or AFR/O2 sensor replacement, fuel system repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2194 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Inspecting sensors and connectors is DIY-friendly; fuel pressure and sensor circuit testing is intermediate.
Pro tip: Relieve fuel pressure first (pull the pump fuse, run the engine until it stalls). Work cold, battery disconnected, extinguisher within reach — no power tools near open fuel.
As an Amazon Associate, WrenchFair earns from qualifying purchases.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →