P2174: Throttle actuator control system sudden low air flow detected
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFail-safe mode can leave the vehicle with no throttle response or unable to start - do not drive in this condition.
The computer detected a sudden drop in air flowing through the throttle system and went into fail-safe mode.
Key facts
P2174 means throttle actuator control system sudden low air flow detected. The computer detected a sudden drop in air flowing through the throttle system and went into fail-safe mode. WrenchFair's published fair-price range for this repair is $0–$300 parts and $100–$300 labor at independent shops.
WrenchFair rates P2174 a 3-of-5 DIY difficulty (“Inspecting wiring and checking for other codes is DIY-friendly; MAP sensor circuit testing is intermediate.”) with a “Diagnose soon” driveability rating: Fail-safe mode can leave the vehicle with no throttle response or unable to start - do not drive in this condition. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
engine may not start
no or low throttle response
automatic transmission will not shift
additional codes set
Likely causes
Manifold absolute pressure sensor malfunction
Engine overheating
Abnormal system voltages
Any other malfunction causing the PCM to initiate fail-safe mode
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Research technical service bulletins for your vehicle by year, model, and engine.
Complete a PCM scan to identify other trouble codes - diagnose those first.
Check for TSBs related to any other codes found.
If no other codes are present, inspect all throttle control actuator wiring and connections.
Check the MAP sensor circuitry.
Do NOT replace the throttle control actuator or PCM first - address other codes first.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $300
Labor$100 – $300
Depends on the underlying malfunction causing fail-safe. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2174 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Inspecting wiring and checking for other codes is DIY-friendly; MAP sensor circuit testing is intermediate.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →