P2145

P2145: Exhaust gas recirculation vent control circuit high

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The voltage on the EGR vent solenoid circuit is too high - the computer cannot properly control the valve that vents excess exhaust gas.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 7 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Research technical service bulletins for your vehicle.
  2. Let the engine cool down - EGR components are mounted near the hot exhaust.
  3. Inspect all rubber vacuum lines to the EGR vent solenoid for burning, cracking, or kinks - replace deteriorated lines. Tests: EGR vent solenoid defective
  4. Verify the integrity of the wiring harnesses around the exhaust - tie up loose wires.
  5. Inspect the vent solenoid for cracks and water intrusion; ensure connectors are secure with intact tabs.
  6. Remove the EGR valve if accessible and clean soot with carburetor cleaner.
  7. Test the vent solenoid and its circuit with a DVOM against service specifications.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$50 – $400
Labor$100 – $300

EGR vent solenoid replacement, EGR cleaning, wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2145 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Letting the engine cool, inspecting vacuum lines and wiring, and cleaning the EGR valve are DIY-friendly.

Watch this repair on YouTube

Parts & tools

EGR toolkit — what the job actually takes

Torque specs: Typically 20–30 Nm into iron, less into aluminum — verify spec.

Pro tip: Clean the passages, not just the valve — a new valve on clogged passages throws the same code.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →