P209B

P209B: Reductant injection air pressure sensor B circuit range/performance

DIY difficulty 5/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

On your diesel, the SCR emissions system's air pressure sensor B is giving readings outside its normal range - the system that sprays diesel exhaust fluid into the exhaust may be disabled.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check for technical service bulletins for your vehicle.
  2. Retrieve all codes and freeze frame data, clear the codes, and test drive.
  3. Check the reductant supply system for pressure loss - activate the pump and inspect for external leaks. Tests: Leaking reductant supply pump (internal or external)
  4. Check the supply pump and injector for internal or external leakage. Tests: Leaking reductant supply pump (internal or external)
  5. Test the reductant injection pressure sensors against the manufacturer's specifications.
  6. Test the input and output signal circuits between the sensor and the PCM/SCR controller.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$150 – $800
Labor$200 – $700

Reductant pressure sensor or supply pump replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P209B ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

5 of 5 — Diesel SCR work involves high-pressure reductant plumbing and electrical testing - specialist-level work for most owners.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →