P2049

P2049: Reductant injection valve circuit high bank 1 unit 1

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The DEF injector for bank 1 (the side with cylinder 1) is getting too much voltage - usually a wire shorted to power or a failed injector. DEF dosing on that side is wrong, so emissions climb and the SCR system can shut down.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 7 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check for technical service bulletins for your make and model.
  2. Visually inspect the reductant heater and injector harnesses and connectors for burnt or damaged wiring and repair it before proceeding. Tests: Burnt or damaged wiring and connectors in the SCR harness
  3. Retrieve all codes and freeze-frame data, record it, clear the codes, and drive to see if P2049 resets.
  4. Test fuses with the circuit loaded to avoid misdiagnosis, and verify battery voltage and ground at the SCR control system. Tests: Wire shorted to power in the reductant injection valve control circuit (most common)
  5. Use the scan tool to activate the reductant injector valve and test the output control circuit voltage.
  6. If the control voltage is good, test the injection valve itself against the factory specs and replace it if it fails.
  7. Only suspect the controller or PCM after the valve, wiring, and power supply are all proven good.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$150 – $700
Labor$150 – $450

Reductant injection valve replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2049 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Visual inspection of the harness and connectors is easy; testing the injector control circuit needs the factory flowcharts and a scan tool that can activate the injector.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →