P2002

P2002: Diesel particulate filter efficiency below threshold

For your specific vehicle: P2002 on a 2016–2019 Ford F-650 · 2016–2019 Ford F-750

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The filter in your diesel's exhaust that catches soot is clogged or damaged. The car may go into limp mode and need a highway drive or professional cleaning to fix.

VW/Audi note (VCDS): Soot load vs ash load tells the story: soot burns off with regeneration, ash never does - high ash means the DPF is at end of life.
Model notes: DPFs need regular highway running to regenerate - a diesel used only for short trips will clog its DPF no matter what. Never ignore a DPF warning light; driving through it turns a cleaning into a replacement.

Key facts

Symptoms

Likely causes

Owner notes linked to P2002: 2 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check soot load and ash load PIDs - high soot with low ash may clear with a forced regeneration Tests: Soot-overloaded DPF from short-trip driving without regeneration (most common)
  2. Take an extended highway drive at steady speed to allow passive regeneration Tests: Soot-overloaded DPF from short-trip driving without regeneration (most common)
  3. If regeneration fails, check the differential pressure sensor first - it lies often Tests: Failed differential pressure sensor giving false readings
  4. Fix upstream soot sources (injectors, EGR, turbo seals) before replacing the DPF or it will clog again Tests: Upstream problem (leaking injector, bad EGR) producing excess soot

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$100 – $500
Labor$200 – $600

Diesel emissions parts are expensive; diagnosis first. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2002 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Diagnosis is DIY-friendly; the fix ranges from a highway drive to professional cleaning or replacement.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →