P0EF6: Drive Motor C Temperature Sensor Over Temperature
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonExpect reduced power or limp mode; get it diagnosed before any long drive.
The drive motor temperature sensor is running hotter than its safe limit. Expect reduced power or limp mode.
Key facts
P0EF6 means drive Motor C Temperature Sensor Over Temperature. The drive motor temperature sensor is running hotter than its safe limit. Expect reduced power or limp mode. WrenchFair's published fair-price range for this repair is $150–$2500 parts and $150–$500 labor at independent shops.
WrenchFair rates P0EF6 a 4-of-5 DIY difficulty (“High-voltage system: lethal voltage in the pack and orange cables - pack and inverter internals are qualified-technician-only work, and DIY is limited to visual checks, fuses, and 12V-side testing.”) with a “Diagnose soon” driveability rating: Expect reduced power or limp mode; get it diagnosed before any long drive. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
reduced power or limp mode
warning light on
power cut to protect components
Likely causes
cooling system fault - pump, fan, or coolant flow (most common)
sustained high load
blocked airflow or debris
temperature sensor reading high (less common)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. HIGH-VOLTAGE SAFETY FIRST: this code touches the traction-battery high-voltage system. Lethal voltage lives in the pack and the orange cables - pack internals are qualified-technician-only work. DIY is limited to visual inspection, fuses, and 12V-side checks with the system depowered.
2. Clear the code and confirm it returns under the same conditions before replacing anything.
3. Check coolant level, coolant flow, and that the relevant pump and fans actually run. Tests: cooling system fault - pump, fan, or coolant flow (most common)
4. Look for blocked airflow, debris, or kinked coolant hoses around the drive motor c temperature sensor. Tests: blocked airflow or debris
5. Compare the drive motor c temperature sensor temperature reading on a scan tool against the other temperature sensors - a lone sensor reading far off suggests the sensor, matching high readings suggest a real cooling problem.
6. Fix the cooling fault first, clear the code, and retest under load.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$150 – $2500
Labor$150 – $500
Repairing the drive motor c temperature sensor cooling fault. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0EF6 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — High-voltage system: lethal voltage in the pack and orange cables - pack and inverter internals are qualified-technician-only work, and DIY is limited to visual checks, fuses, and 12V-side testing.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →