Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYou will usually just see a warning light - diagnose it before it turns into a bigger problem.
The car has flagged the engine failed to crank as not working right. You will usually just see a warning light.
Key facts
P0E4E means engine Failed to Crank. The car has flagged the engine failed to crank as not working right. You will usually just see a warning light. WrenchFair's published fair-price range for this repair is $230–$1720 parts and $140–$900 labor at independent shops.
WrenchFair rates P0E4E a 3-of-5 DIY difficulty (“Diagnosis needs a scan tool with hybrid PIDs and the factory service manual; component replacement difficulty varies by vehicle.”) with a “Diagnose soon” driveability rating: You will usually just see a warning light - diagnose it before it turns into a bigger problem. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
warning light on
affected system inoperative
reduced performance
Likely causes
starter motor failed (most common)
12V battery weak
component failure
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Clear the code and confirm it returns under the same conditions before replacing anything.
2. Inspect the engine failed to crank connector and wiring for damage, corrosion, or loose pins.
3. Check live data on a scan tool and compare against expected values in the service manual.
4. Rule out wiring and connector faults before replacing the engine failed to crank; suspect the control module only after the circuit tests good.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$230 – $1720
Labor$140 – $900
Replacing the failed engine failed to crank. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0E4E ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Diagnosis needs a scan tool with hybrid PIDs and the factory service manual; component replacement difficulty varies by vehicle.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →