P0D1F: Control Module Date/Time Synchronization Error
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYou will usually just see a warning light - diagnose it before it turns into a bigger problem.
The car has flagged a fault in the control module date/time synchronization. You will usually just see a warning light.
Key facts
P0D1F means control Module Date/Time Synchronization Error. The car has flagged a fault in the control module date/time synchronization. You will usually just see a warning light. WrenchFair's published fair-price range for this repair is $20–$230 parts and $40–$270 labor at independent shops.
WrenchFair rates P0D1F a 2-of-5 DIY difficulty (“Diagnosis needs a scan tool with hybrid PIDs and the factory service manual; component replacement difficulty varies by vehicle.”) with a “Diagnose soon” driveability rating: You will usually just see a warning light - diagnose it before it turns into a bigger problem. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Clear the code and confirm it returns under the same conditions before replacing anything.
2. Inspect the control module date/time synchronization connector and wiring for damage, corrosion, or loose pins.
3. Check live data on a scan tool and compare against expected values in the service manual.
4. Rule out wiring and connector faults before replacing the control module date/time synchronization; suspect the control module only after the circuit tests good.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $230
Labor$40 – $270
Battery disconnect cleared internal clock. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0D1F ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Diagnosis needs a scan tool with hybrid PIDs and the factory service manual; component replacement difficulty varies by vehicle.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →