P0D08

P0D08: Battery Charging System Positive Contactor A Stuck Closed

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The battery charging system positive contactor was told to open but stayed closed - it can't switch off the way it should. The car may refuse to charge or stop charging partway; it is usually still drivable on its remaining charge.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. 1. HIGH-VOLTAGE SAFETY FIRST: this code touches the traction-battery high-voltage system. Lethal voltage lives in the pack and the orange cables - pack internals are qualified-technician-only work. DIY is limited to visual inspection, fuses, and 12V-side checks with the system depowered.
  2. 2. Clear the code and confirm it returns under the same conditions before replacing anything.
  3. 3. Inspect the battery charging system positive contactor a connector and wiring for damage or corrosion; check related fuses.
  4. 4. Command the battery charging system positive contactor a on and off with a scan tool while listening or watching for actuation.
  5. 5. Check the control-side wiring and 12V supply per the service manual - a missing command signal points at wiring or the module, a present signal with no movement points at the battery charging system positive contactor a itself.
  6. 6. If the battery charging system positive contactor a itself is faulty and lives inside the high-voltage assembly, replacement is qualified-technician work - do not open the pack.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$100 – $1500
Labor$150 – $500

Replacing the welded contactor (qualified technician only). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0D08 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — High-voltage system: lethal voltage in the pack and orange cables - pack and inverter internals are qualified-technician-only work, and DIY is limited to visual checks, fuses, and 12V-side testing.

Watch this repair on YouTube

Parts & tools

Battery & charging toolkit — what the job actually takes

Torque specs: Terminal clamps: snug, typically 5–8 Nm. Over-tightening cracks the battery post.

Pro tip: Disconnect negative first, reconnect negative last. On module-heavy cars use a memory saver so you don’t lose radio codes and adaptations.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →