P0C2F

P0C2F: Hybrid battery temperature sensor C circuit high

DIY difficulty 5/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

One of the temperature sensors inside your hybrid battery is stuck reading high. Expect the cooling fan running nonstop or the car limiting hybrid power.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Scan all codes and compare sensor C's reading against the other pack temperature sensors. Tests: Failed battery temperature sensor C (most common)
  2. Inspect the pack's external harness and connector for damage (visual only - do not open the pack). Tests: Corroded connector at the pack
  3. Look up TSBs for the year, make, and model matching this code.
  4. Test the sensor circuit per the factory chart if accessible without opening the pack. Tests: Shorted sensor wiring inside the pack
  5. If the sensor is confirmed bad, the pack must be opened - this is specialist work.
  6. After repair, verify all pack temperature sensors agree before returning the car.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$300 – $1200
Labor$400 – $1500

Hybrid battery temperature sensor C replacement (pack must be opened; specialist work). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0C2F ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

5 of 5 — Diagnosis is scan-tool work; the sensor lives inside the pack - specialist only.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →