Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonExpect reduced power or limp mode — the hybrid system protects itself by limiting the electric side. Drive gently to a shop and skip long trips.
The electric drive motor is fed by high-voltage cables straight from the battery. This code means the computer got a reading stuck too high from the motor or one of its sensors. The motor and its orange cables carry lethal voltage, so this stays a professional repair — you can still check the 12V battery and the connectors you can reach.
Key facts
P0A42 means drive motor A position sensor circuit high. The electric drive motor is fed by high-voltage cables straight from the battery. This code means the computer got a reading stuck too high from the motor or one of its sensors. The motor and its orange cables carry lethal voltage, so this stays a professional repair — you can still check the 12V battery and the connectors you can reach. WrenchFair's published fair-price range for this repair is $125–$1500 parts and $300–$1200 labor at independent shops.
WrenchFair rates P0A42 a 4-of-5 DIY difficulty (“Mostly a shop job: you can check the 12V battery, fuses, and accessible connectors, but high-voltage diagnosis is technician-only.”) with a “Diagnose soon” driveability rating: Expect reduced power or limp mode — the hybrid system protects itself by limiting the electric side. Drive gently to a shop and skip long trips. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
ev/hybrid system warning light on
reduced motor power or torque
possible limp mode or vehicle shutdown
Likely causes
signal wire shorted to B+
open sensor
connector pins corroded - high contact resistance
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Start with high-voltage safety: the traction battery and its orange cables carry voltage high enough to kill. Never open the pack or probe HV connectors yourself — DIY on this code means the 12V system, fuses, and accessible low-voltage connectors only. Tests: connector pins corroded - high contact resistance
Check the 12V battery's health and terminal connections — a weak 12V battery is a classic cause of phantom hybrid codes.
Inspect the motor's low-voltage sensor connectors for corrosion, damage, or loose pins — hands off the orange HV cables. Tests: connector pins corroded - high contact resistance
Look for companion codes: position, current, and temperature sensor codes together point at a shared harness problem.
With live data running, gently wiggle-test the sensor harness to catch intermittents.
Motor or resolver replacement is high-voltage work — technician-only.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$125 – $1500
Labor$300 – $1200
signal wire shorted to B+. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0A42 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Mostly a shop job: you can check the 12V battery, fuses, and accessible connectors, but high-voltage diagnosis is technician-only.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →