Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe car may refuse to enter ready mode or shut down without warning — plan on a tow rather than forcing a drive.
Inside the big high-voltage battery are heavy-duty switches that connect the battery to the rest of the car when you power up. This code means the computer can't confirm the high-voltage power path is working right (a reading stuck too high). Those switches sit inside a pack that carries lethal voltage, so this is professional-only work.
Key facts
P0A29 means hybrid/EV battery power off circuit high. Inside the big high-voltage battery are heavy-duty switches that connect the battery to the rest of the car when you power up. This code means the computer can't confirm the high-voltage power path is working right (a reading stuck too high). Those switches sit inside a pack that carries lethal voltage, so this is professional-only work. WrenchFair's published fair-price range for this repair is $50–$1100 parts and $300–$1050 labor at independent shops.
WrenchFair rates P0A29 a 4-of-5 DIY difficulty (“Mostly a shop job: you can check the 12V battery, fuses, and accessible connectors, but high-voltage diagnosis is technician-only.”) with a “Diagnose soon” driveability rating: The car may refuse to enter ready mode or shut down without warning — plan on a tow rather than forcing a drive. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
ev/hybrid system warning light on
reduced power output or limp mode
charging may fail or be slowed
reduced electric range
Likely causes
wire shorted to B+
pull-down resistor open
connector pins corroded - high contact resistance
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Start with high-voltage safety: the traction battery and its orange cables carry voltage high enough to kill. Never open the pack or probe HV connectors yourself — DIY on this code means the 12V system, fuses, and accessible low-voltage connectors only. Tests: connector pins corroded - high contact resistance
Check the 12V battery's health and terminal connections — a weak 12V battery is a classic cause of phantom hybrid codes.
When powering on, listen for the contactors clunking as high voltage connects — silence or repeated clicking is a clue.
Check the fuses feeding the battery ECU and the 12V system.
Contactor service means opening the high-voltage pack — technician-only. Get a written estimate.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $1100
Labor$300 – $1050
wire shorted to B+. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0A29 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Mostly a shop job: you can check the 12V battery, fuses, and accessible connectors, but high-voltage diagnosis is technician-only.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →