P0A16

P0A16: Engine mount A control circuit high

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Active engine mounts have a small solenoid or vacuum valve that lets the computer stiffen or soften the mount to cancel vibration. This code means the computer can't control the mount properly. Expect extra vibration or a clunk at idle and startup — annoying, but not a breakdown risk. Good news: this is an ordinary 12V circuit, nowhere near the high-voltage system.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. This is an ordinary 12V circuit — no high-voltage safety concerns beyond the usual care working around a running engine.
  2. Find the mount's electrical connector (and vacuum line if equipped) and check for corrosion, loose pins, or cracked hoses. Tests: connector pins corroded - high contact resistance
  3. Check the fuse feeding the mount control circuit. Tests: control wire shorted to B+
  4. If your scanner can command the mount, toggle it and feel for a change in idle vibration — no change points at a dead solenoid.
  5. Also inspect the mount rubber itself: a torn mount needs replacement regardless of the electrical side.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$75 – $850
Labor$150 – $750

control wire shorted to B+. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0A16 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Straightforward 12V electrical work: check the connector, wiring, vacuum line, and solenoid before replacing the mount.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →