P0993: Transmission fluid pressure sensor/switch F circuit range/performance
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBad pressure data makes every shift a guess - verify the sensor against a real gauge before it costs you a clutch pack.
The pressure sensor for another part of your transmission is giving readings that do not add up. Expect erratic shifting as the computer works from bad data.
Key facts
P0993 means transmission fluid pressure sensor/switch F circuit range/performance. The pressure sensor for another part of your transmission is giving readings that do not add up. Expect erratic shifting as the computer works from bad data. WrenchFair's published fair-price range for this repair is $80–$600 parts and $300–$800 labor at independent shops.
WrenchFair rates P0993 a 4-of-5 DIY difficulty (“Comparing the sensor reading to a manual gauge is the decisive test.”) with a “Diagnose soon” driveability rating: Bad pressure data makes every shift a guess - verify the sensor against a real gauge before it costs you a clutch pack. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
erratic shifting
slipping or flaring shifts
transmission in limp mode
Likely causes
Drifting or slow-responding pressure sensor F (most common)
Corroded sensor connector adding resistance
Contaminated fluid affecting the sensor
Wiring with high resistance
Failed PCM/TCM (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan all codes and watch sensor F's live reading while the transmission shifts.
Compare the sensor reading against actual line pressure with a manual gauge - if they disagree, the sensor is lying. Tests: Drifting or slow-responding pressure sensor F (most common)
Look up TSBs for the year, make, and model matching this code.
Inspect the wiring and connector for corrosion and fluid intrusion. Tests: Corroded sensor connector adding resistance
Test the sensor circuit voltage and ground per the factory chart.
If the circuit is good and the reading still disagrees with the gauge, replace the sensor.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $600
Labor$300 – $800
Pressure sensor F replacement (pan removal; often sold with the valve body or internal harness). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0993 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Comparing the sensor reading to a manual gauge is the decisive test.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →