P0965: Pressure control solenoid B control circuit range/performance
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonA misbehaving pressure solenoid makes every shift unpredictable - a fluid service is the cheapest first step.
The second pressure-regulating solenoid in your transmission is responding badly - sticking or slow. Expect erratic, harsh shifts.
Key facts
P0965 means pressure control solenoid B control circuit range/performance. The second pressure-regulating solenoid in your transmission is responding badly - sticking or slow. Expect erratic, harsh shifts. WrenchFair's published fair-price range for this repair is $60–$400 parts and $150–$600 labor at independent shops.
WrenchFair rates P0965 a 4-of-5 DIY difficulty (“A fluid service is worth trying first for a sticking solenoid.”) with a “Diagnose soon” driveability rating: A misbehaving pressure solenoid makes every shift unpredictable - a fluid service is the cheapest first step. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
erratic or harsh shifting
transmission slipping
delayed engagement
Likely causes
Sticking pressure control solenoid B from contaminated fluid (most common)
Worn solenoid that no longer responds to commands
Low fluid level affecting pressure regulation
Faulty pressure sensor giving false feedback
Failed PCM/TCM (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check fluid level and condition - old, varnished fluid is the usual reason solenoids stick. Tests: Sticking pressure control solenoid B from contaminated fluid (most common)
Scan all codes and watch pressure-related live data if your scan tool supports it. Tests: Sticking pressure control solenoid B from contaminated fluid (most common)
Look up TSBs for the year, make, and model matching this code.
Inspect the wiring and connector; test the solenoid circuit per the factory chart. Tests: Sticking pressure control solenoid B from contaminated fluid (most common)
A fluid and filter service sometimes frees a mildly sticking solenoid.
If the fault persists after service, the solenoid needs replacement.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $400
Labor$150 – $600
Pressure control solenoid B replacement (fluid and filter service included). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0965 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — A fluid service is worth trying first for a sticking solenoid.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →