Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonOvervoltage can damage the TCM and other modules - check charging voltage promptly.
Your transmission computer is seeing too much voltage - usually the alternator overcharging. That can fry electronics, so check it soon.
Key facts
P0883 means tCM power input signal high. Your transmission computer is seeing too much voltage - usually the alternator overcharging. That can fry electronics, so check it soon. WrenchFair's published fair-price range for this repair is $20–$400 parts and $120–$400 labor at independent shops.
WrenchFair rates P0883 a 2-of-5 DIY difficulty (“Start at the battery - a charging-system fault is the most common cause and the easiest to check.”) with a “Diagnose soon” driveability rating: Overvoltage can damage the TCM and other modules - check charging voltage promptly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
multiple warning lights across different systems
harsh shifting
battery or charging-system warning light
Likely causes
Overcharging alternator or failed voltage regulator (most common - check system voltage first)
Shorted TCM power relay
Wiring short feeding excess voltage to the TCM circuit
Corroded ground causing a false high reading
Failed TCM (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check system voltage at the battery with the engine running - if it is high, diagnose the charging system first. Tests: Overcharging alternator or failed voltage regulator (most common - check system voltage…
Scan all modules; overvoltage usually sets codes in more than one module.
Look up TSBs for the year, make, and model matching this code.
Inspect the TCM relay and power feed for shorts to higher-voltage sources. Tests: Wiring short feeding excess voltage to the TCM circuit
Test TCM power and ground per the factory chart.
If system voltage is normal and wiring tests good, suspect the TCM's internal voltage monitoring.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $400
Labor$120 – $400
Charging-system or TCM power-circuit repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0883 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Start at the battery - a charging-system fault is the most common cause and the easiest to check.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →