P0844

P0844: Transmission fluid pressure sensor/switch A circuit intermittent

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your transmission's A pressure sensor works most of the time but cuts out randomly - expect sudden bad shifting, then everything normal again.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check for TSBs and companion codes.
  2. Graph the A-circuit pressure reading on the scan tool during a road test; watch for dropouts. Tests: Failing pressure sensor/switch A with an internal intermittent break
  3. Wiggle-test the transmission harness and connector while watching live data. Tests: Loose or corroded connector at the transmission (most common)
  4. Pull the connector apart and inspect terminals for burning or green corrosion; clean and apply dielectric grease. Tests: Loose or corroded connector at the transmission (most common)
  5. Check the sensor ground and control-module grounds.
  6. Only replace the sensor if the wiggle test isolates the dropout to the sensor itself.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$80 – $350
Labor$200 – $500

Connector repair or transmission fluid pressure sensor/switch replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0844 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Intermittents are found by wiggle-testing while watching live data - patience beats parts.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →