P0841

P0841: Transmission fluid pressure sensor/switch A circuit range/performance

For your specific vehicle: P0841 on a 2014–2016 Nissan Rogue · 2014–2018 Subaru Forester

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The sensor measuring your transmission's internal hydraulic pressure is giving readings that don't make sense. Shifting may be off while the computer can't verify pressure.

VW/Audi note (VCDS): The gauge-vs-sensor comparison is the entire diagnosis - never skip it on pressure sensor codes.
Model notes: Same rule as engine sensors: decide whether the sensor is lying or telling the truth about a real pressure problem before buying parts.

Key facts

Symptoms

Likely causes

Owner notes linked to P0841: 2 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Measure actual line pressure with a gauge on the test port Tests: Actually wrong line pressure the sensor is correctly reporting - verify
  2. If the gauge disagrees with the sensor, replace the sensor
  3. If the gauge agrees, diagnose the pressure problem (pump, regulator, filter) Tests: Drifting pressure sensor (most common)
  4. Check fluid condition - debris can jam pressure sensors Tests: Drifting pressure sensor (most common)

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$30 – $120
Labor$80 – $200

Sensor replacement is the typical fix. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0841 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Verify actual pressure with a gauge before replacing the sensor.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →