P0814

P0814: Transmission range display circuit

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The dashboard gear indicator (P-R-N-D) is getting bad information. It may show the wrong gear, go blank, or the car may refuse to start.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Compare the dash indicator against the actual shifter position in every detent and note the mismatches. Tests: Broken or faulty shift indicator in the cluster
  2. Look up TSBs for the year, make, and model matching this code.
  3. Inspect the range sensor, shift cable, and linkage for looseness, wear, or misadjustment. Tests: Failed transmission range sensor (most common)
  4. Test voltage, ground, and signal output at the range sensor in each shifter position. Tests: Failed transmission range sensor (most common)
  5. Test the sensor against factory specifications; replace it if it fails, and adjust the new one per procedure.
  6. Clear the code and confirm the indicator, the scan-tool gear reading, and the shifter all agree.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$50 – $250
Labor$100 – $300

Transmission range sensor / neutral safety switch replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0814 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — The sensor sits on the transmission where the shift cable attaches - accessible, but adjustment matters.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →