Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeA bad indicator lamp changes nothing about how the car drives - fix it when convenient.
The dashboard light for your skip-shift feature has a wiring or bulb fault. Everything still drives normally; the light just will not behave correctly.
Key facts
P0804 means upshift/skip shift lamp control circuit. The dashboard light for your skip-shift feature has a wiring or bulb fault. Everything still drives normally; the light just will not behave correctly. WrenchFair's published fair-price range for this repair is $15–$150 parts and $80–$200 labor at independent shops.
WrenchFair rates P0804 a 2-of-5 DIY difficulty (“Start at the bulb and fuse - both are easy checks before chasing wiring.”) with a “Drive safe” driveability rating: A bad indicator lamp changes nothing about how the car drives - fix it when convenient. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
skip-shift lamp inoperative, stuck on, or flashing
skip-shift feature partially or totally disabled
no drivability symptoms
Likely causes
Burned-out skip-shift indicator bulb or LED (most common)
Shorted or open wiring or connector in the lamp control circuit
Corroded instrument-cluster or transmission connector
Blown fuse in the skip-shift/lamp circuit
Controller programming error (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan codes, record freeze-frame data, clear, and confirm the code returns.
Check the skip-shift circuit fuse with the circuit loaded, and inspect/replace the indicator bulb or LED. Tests: Burned-out skip-shift indicator bulb or LED (most common)
Test voltage and ground at the lamp socket with the feature commanded on.
Inspect the wiring and connectors between the control module, transmission, and instrument cluster for damage or corrosion. Tests: Corroded instrument-cluster or transmission connector
Voltage-drop test the lamp control circuit with the module disconnected before suspecting the module or its programming.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $150
Labor$80 – $200
Indicator bulb replacement and lamp circuit wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0804 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Start at the bulb and fuse - both are easy checks before chasing wiring.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →