P0802: Transmission control system MIL request circuit/open
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe transmission may drop into limp mode with harsh shifting and reduced power - get it diagnosed before driving far.
Your transmission flagged a serious-enough fault to request the check-engine light. Expect harsh or delayed shifting, and possibly limp mode. The real answer is in the other codes stored with this one.
Key facts
P0802 means transmission control system MIL request circuit/open. Your transmission flagged a serious-enough fault to request the check-engine light. Expect harsh or delayed shifting, and possibly limp mode. The real answer is in the other codes stored with this one. WrenchFair's published fair-price range for this repair is $80–$600 parts and $150–$450 labor at independent shops.
WrenchFair rates P0802 a 3-of-5 DIY difficulty (“The diagnostic work is straightforward with a scanner and multimeter; the hard part is whatever the underlying fault turns out to be.”) with a “Diagnose soon” driveability rating: The transmission may drop into limp mode with harsh shifting and reduced power - get it diagnosed before driving far. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
erratic or harsh shifting
delayed or missing gear engagement
transmission stuck in limp-in mode (one gear)
check-engine light on
Likely causes
Underlying transmission fault named by a companion code - diagnose that first (most common)
Shorted or open wiring in the transmission control circuits
Failed transmission control module or PCM
Controller programming error or corrupted calibration
Low, burnt, or contaminated transmission fluid contributing to the underlying fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Read and record every stored code and freeze-frame data - P0802 is the messenger, so start diagnosis on the companion transmission code(s). Tests: Underlying transmission fault named by a companion code - diagnose that first (most…
Check transmission fluid level, color, and smell; burnt fluid or heavy debris in the pan points to internal damage. Tests: Low, burnt, or contaminated transmission fluid contributing to the underlying fault
Look up TSBs for the year, make, model, and stored codes.
Test power and ground circuits at the TCM/PCM with the circuit loaded, including a loaded fuse test. Tests: Shorted or open wiring in the transmission control circuits
Work through the factory diagnostic chart for the companion code - voltage-drop test control circuits with modules disconnected.
Only consider module replacement or reprogramming after wiring, power, and ground are proven good.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $600
Labor$150 – $450
Wiring repair or transmission control module replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0802 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The diagnostic work is straightforward with a scanner and multimeter; the hard part is whatever the underlying fault turns out to be.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →