P079B: Transmission Friction Element B Slip Detected
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonSlipping destroys a transmission quickly - minimize driving until diagnosed.
One of your transmission's clutch packs - element B - is slipping. Slipping makes destructive heat fast, so check the fluid level right now. If the fluid is fine, the clutch pack is worn and needs a rebuild.
Key facts
P079B means transmission Friction Element B Slip Detected. One of your transmission's clutch packs - element B - is slipping. Slipping makes destructive heat fast, so check the fluid level right now. If the fluid is fine, the clutch pack is worn and needs a rebuild. WrenchFair's published fair-price range for this repair is $200–$4000 parts and $300–$1500 labor at independent shops.
WrenchFair rates P079B a 4-of-5 DIY difficulty (“Internal transmission work - a shop diagnosis is the realistic path.”) with a “Diagnose soon” driveability rating: Slipping destroys a transmission quickly - minimize driving until diagnosed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
slipping
missing gear
limp mode
burnt fluid smell
check engine light on
Likely causes
low transmission fluid
worn friction element B
low line pressure
faulty pressure control solenoid
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check the fluid level and condition immediately - burnt fluid confirms internal damage.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Have a transmission shop test line pressure and inspect. Tests: low line pressure
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$200 – $4000
Labor$300 – $1500
Transmission rebuild per diagnosis. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P079B ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Internal transmission work - a shop diagnosis is the realistic path.
Torque specs: Pan bolts: typically 8–12 Nm in a crisscross pattern — verify spec. Over-tightening warps the pan and causes leaks.
Pro tip: Use ONLY the fluid your transmission calls for (e.g. ZF Lifeguard 8 for ZF 8-speeds) — wrong fluid kills transmissions. Measure what came out.
As an Amazon Associate, WrenchFair earns from qualifying purchases.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →