Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonTransmission may shift poorly. Drive gently and diagnose soon.
One of the transmission's gear-shifting solenoids isn't working right. You'll likely lose certain gears or get harsh, wrong shifts.
VW/Audi note (VCDS): The solenoid application chart turns a vague shift complaint into a specific solenoid suspect - always check it first.
Model notes: Match the symptoms to the solenoid chart before opening anything - if the missing gears don't match solenoid A's circuit, keep diagnosing.
Key facts
P0750 means shift solenoid A malfunction. One of the transmission's gear-shifting solenoids isn't working right. You'll likely lose certain gears or get harsh, wrong shifts. WrenchFair's published fair-price range for this repair is $50–$200 parts and $200–$600 labor at independent shops.
WrenchFair rates P0750 a 4-of-5 DIY difficulty (“Pan removal for access; solenoids are serviceable but diagnosis needs the gear chart.”) with a “Diagnose soon” driveability rating: Transmission may shift poorly. Drive gently and diagnose soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
missing gears
harsh or wrong shifts
limp mode
check engine light
transmission slipping
transmission overheating
poor fuel economy
Likely causes
Sticking or failed shift solenoid A (most common)
Contaminated fluid clogging the solenoid
Wiring fault
Valve body bore wear
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Identify which gears solenoid A controls from the application chart - the symptom gears should match Tests: Sticking or failed shift solenoid A (most common)
Test solenoid resistance and operation Tests: Sticking or failed shift solenoid A (most common)
Check fluid for contamination that could stick the solenoid Tests: Contaminated fluid clogging the solenoid
Replace the solenoid; consider the full set on high-mileage units while the pan is off Tests: Sticking or failed shift solenoid A (most common)
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $200
Labor$200 – $600
Solenoid replacement; pan-accessible on many transmissions. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0750 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Pan removal for access; solenoids are serviceable but diagnosis needs the gear chart.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →