Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonTransmission may shift poorly. Drive gently and diagnose soon.
The solenoid regulating your transmission's hydraulic pressure has an electrical fault. Expect harsh shifting or slipping across all gears, not just one.
VW/Audi note (VCDS): Commanded vs actual line pressure PIDs (where available) show whether the solenoid can still regulate after replacement.
Model notes: In failsafe, the TCM commands maximum line pressure - shifts become brutally harsh. That harshness is the protection strategy, not additional damage.
Key facts
P0748 means pressure control solenoid A electrical. The solenoid regulating your transmission's hydraulic pressure has an electrical fault. Expect harsh shifting or slipping across all gears, not just one. WrenchFair's published fair-price range for this repair is $50–$200 parts and $200–$600 labor at independent shops.
WrenchFair rates P0748 a 4-of-5 DIY difficulty (“Pan removal for access; the solenoid is usually serviceable without full valve body removal.”) with a “Diagnose soon” driveability rating: Transmission may shift poorly. Drive gently and diagnose soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
harsh shifts
slipping shifts
check engine light
limp mode with max line pressure
transmission overheating
poor fuel economy
Likely causes
Failed pressure control solenoid (most common)
Internal wiring fault
Corroded case connector
Contaminated fluid clogging the solenoid
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Measure solenoid resistance at the case connector Tests: Corroded case connector
Remove the pan and test at the solenoid to isolate internal vs external faults Tests: Internal wiring fault
Replace the solenoid and service the fluid and filter while the pan is off Tests: Contaminated fluid clogging the solenoid
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $200
Labor$200 – $600
Solenoid replacement; pan-accessible on many transmissions. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0748 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Pan removal for access; the solenoid is usually serviceable without full valve body removal.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →