Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonHigher RPM and worse mileage. Not immediately dangerous, but don't ignore it.
The wiring or solenoid controlling your torque converter's lockup clutch has an electrical fault. Highway mileage will suffer and the light stays on.
VW/Audi note (VCDS): Resistance spec is usually in the low tens of ohms; a reading of zero or infinity at the case connector means the pan is coming off.
Model notes: Internal transmission harnesses get brittle with heat and age - while the pan is off for a solenoid, inspect the whole harness.
Key facts
P0743 means torque converter clutch circuit electrical. The wiring or solenoid controlling your torque converter's lockup clutch has an electrical fault. Highway mileage will suffer and the light stays on. WrenchFair's published fair-price range for this repair is $100–$600 parts and $300–$1200 labor at independent shops.
WrenchFair rates P0743 a 3-of-5 DIY difficulty (“Resistance testing at the case connector is the key test; internal harness means pan removal.”) with a “Diagnose soon” driveability rating: Higher RPM and worse mileage. Not immediately dangerous, but don't ignore it. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
no torque converter lockup
poor highway fuel economy
check engine light
stalling when stopping
shudder on takeoff
shudder when stopping
Likely causes
Failed TCC solenoid with open or shorted winding (most common)
Damaged internal transmission harness
Corroded case connector
TCM driver fault (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Measure TCC solenoid resistance at the transmission case connector and compare to spec Tests: Corroded case connector
If resistance is wrong at the case connector, the fault is inside - remove the pan and test at the solenoid Tests: Corroded case connector
Inspect the internal harness for chafing Tests: Damaged internal transmission harness
Replace the solenoid if its winding is open or shorted Tests: Failed TCC solenoid with open or shorted winding (most common)
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $600
Labor$300 – $1200
Fluid service and solenoid are moderate; converter replacement is major. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0743 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Resistance testing at the case connector is the key test; internal harness means pan removal.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →