Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable in warm weather; fix before cold weather.
Your car's computer checked cylinder 7's glow plug and says it is the wrong one - its electrical signature does not match. Usually someone installed the wrong plug, or the plug degraded. Tip: on some VWs, cranking while the glow plug light is still on sets false codes - wait for the light to go out before starting.
Key facts
P06CB means cylinder 7 Glow Plug Incorrect. Your car's computer checked cylinder 7's glow plug and says it is the wrong one - its electrical signature does not match. Usually someone installed the wrong plug, or the plug degraded. Tip: on some VWs, cranking while the glow plug light is still on sets false codes - wait for the light to go out before starting. WrenchFair's published fair-price range for this repair is $15–$60 parts and $75–$250 labor at independent shops.
WrenchFair rates P06CB a 2-of-5 DIY difficulty (“Verify the correct part number; replace with the right plug.”) with a “Diagnose soon” driveability rating: Drivable in warm weather; fix before cold weather. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
hard starting in cold weather
check engine light on
glow plug light behaving oddly
Likely causes
wrong glow plug installed in cylinder 7
degraded glow plug element (cylinder 7)
wiring fault skewing the reading
false code from cranking during the glow phase (some VW)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Confirm the installed plug matches the factory part number. Tests: wrong glow plug installed in cylinder 7
Wait for the glow plug light to go out before cranking, then retest. Tests: false code from cranking during the glow phase (some VW)
Replace cylinder 7's plug with the correct one if the code returns. Tests: wrong glow plug installed in cylinder 7
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $60
Labor$75 – $250
Correct glow plug replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P06CB ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Verify the correct part number; replace with the right plug.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →