Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable in warm weather; hard cold starts until fixed.
Your diesel heats each cylinder with a glow plug for cold starts, and cylinder 10's plug circuit has an electrical fault. Hard cold starting and white smoke are the symptoms. The plug itself burning out is the most common cause.
Key facts
P069C means cylinder 10 Glow Plug Control Circuit Low. Your diesel heats each cylinder with a glow plug for cold starts, and cylinder 10's plug circuit has an electrical fault. Hard cold starting and white smoke are the symptoms. The plug itself burning out is the most common cause. WrenchFair's published fair-price range for this repair is $15–$60 parts and $75–$250 labor at independent shops.
WrenchFair rates P069C a 2-of-5 DIY difficulty (“Glow plug resistance test; the plugs unscrew from the head but can seize.”) with a “Diagnose soon” driveability rating: Drivable in warm weather; hard cold starts until fixed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
hard starting in cold weather
white smoke on cold start
rough cold idle
check engine light on
Likely causes
burned-out glow plug (cylinder 10)
open or shorted wiring
corroded connector
failed glow plug control module
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Test cylinder 10's glow plug resistance and compare with the others - the odd one out is bad. Tests: burned-out glow plug (cylinder 10)
Check the wiring and connector. Tests: corroded connector
Replace the plug if it tests bad; use anti-seize and do not overtighten.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $60
Labor$75 – $250
Glow plug replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P069C ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Glow plug resistance test; the plugs unscrew from the head but can seize.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →