Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonA computer losing power can stall or refuse to start - fix promptly.
The control circuit for your engine computer's main power relay is stuck high - the relay may stay on with the key off and drain your battery. Check the relay and wiring.
Key facts
P0687 means eCM/PCM Power Relay Control Circuit High. The control circuit for your engine computer's main power relay is stuck high - the relay may stay on with the key off and drain your battery. Check the relay and wiring. WrenchFair's published fair-price range for this repair is $15–$120 parts and $75–$200 labor at independent shops.
WrenchFair rates P0687 a 2-of-5 DIY difficulty (“Relay swap and voltage checks; the relay box is usually accessible.”) with a “Diagnose soon” driveability rating: A computer losing power can stall or refuse to start - fix promptly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
no-start or stalling
battery drain (relay stuck on)
multiple electrical glitches
Likely causes
stuck relay
short to voltage in the control wiring
wiring fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Check the related fuses and relays before condemning any part - an open fuse is a cheap fix.
Swap the ECM/PCM power relay with an identical one.
Check power and ground at the relay socket, key on and key off.
Watch for battery drain with the key off if the relay sticks on.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $120
Labor$75 – $200
ECM/PCM power relay replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0687 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Relay swap and voltage checks; the relay box is usually accessible.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →