P066A

P066A: Cylinder 1 Glow Plug Control Circuit Low

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your diesel heats each cylinder with a glow plug for cold starts, and cylinder 1's plug circuit has an electrical fault. Hard cold starting and white smoke are the symptoms. The plug itself burning out is the most common cause.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
  2. Test cylinder 1's glow plug resistance and compare with the others - the odd one out is bad. Tests: burned-out glow plug (cylinder 1)
  3. Check the wiring and connector. Tests: corroded connector
  4. Replace the plug if it tests bad; use anti-seize and do not overtighten.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$15 – $60
Labor$75 – $250

Glow plug replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P066A ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Glow plug resistance test; the plugs unscrew from the head but can seize.

Watch this repair on YouTube

Parts & tools

Diesel glow plug toolkit — what the job actually takes

Torque specs: Typically 12–20 Nm — verify spec. A snapped glow plug can mean cylinder-head removal.

Pro tip: Test each plug with a multimeter first and replace only the dead ones.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →