P0665: Intake Manifold Tuning Valve Control Circuit High (Bank 2)
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable; performance suffers.
The electric motor driving your intake's tuning flap on bank 2 has a wiring fault - the control circuit voltage stuck unusually high. Check the actuator and wiring, and make sure carbon is not jamming the flap.
Key facts
P0665 means intake Manifold Tuning Valve Control Circuit High (Bank 2). The electric motor driving your intake's tuning flap on bank 2 has a wiring fault - the control circuit voltage stuck unusually high. Check the actuator and wiring, and make sure carbon is not jamming the flap. WrenchFair's published fair-price range for this repair is $100–$500 parts and $150–$400 labor at independent shops.
WrenchFair rates P0665 a 3-of-5 DIY difficulty (“Actuator testing; the manifold may need to come off for valve work.”) with a “Diagnose soon” driveability rating: Drivable; performance suffers. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
flat spots in acceleration
Likely causes
failed valve actuator
open or shorted wiring
corroded connector
carbon-jammed valve
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Test the actuator circuit. Tests: failed valve actuator
Check the valve for carbon jamming. Tests: carbon-jammed valve
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $500
Labor$150 – $400
Tuning valve actuator replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0665 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Actuator testing; the manifold may need to come off for valve work.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →