Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable in most cases, but the car may not pass emissions - and some vehicles will not start.
Your car's computer found software it does not recognize - usually an aftermarket performance tune someone installed. The fix is having a dealer flash it back to factory software. Even a legit update can trigger this if it was interrupted.
Key facts
P064F means unauthorized Software/Calibration Detected. Your car's computer found software it does not recognize - usually an aftermarket performance tune someone installed. The fix is having a dealer flash it back to factory software. Even a legit update can trigger this if it was interrupted. WrenchFair's published fair-price range for this repair is $0–$150 parts and $100–$250 labor at independent shops.
WrenchFair rates P064F a 4-of-5 DIY difficulty (“Dealer reflash to factory software.”) with a “Diagnose soon” driveability rating: Drivable in most cases, but the car may not pass emissions - and some vehicles will not start. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
possible no-start on some vehicles
emissions compliance risk
Likely causes
aftermarket performance tune installed
interrupted or corrupted software flash
non-factory calibration
internal module fault (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Ask whether anyone installed a tune or programmer - be honest with the tech. Tests: aftermarket performance tune installed
Have the dealer reflash the module to the factory calibration. Tests: non-factory calibration
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $150
Labor$100 – $250
Dealer reflash to factory software. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P064F ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →