P0644: Driver Display Serial Communication Circuit
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable, but you cannot trust the gauges - fix soon.
The data line between your car's computer and the dashboard has a fault - gauges may read wrong or go dead. Check the wiring and the cluster.
Key facts
P0644 means driver Display Serial Communication Circuit. The data line between your car's computer and the dashboard has a fault - gauges may read wrong or go dead. Check the wiring and the cluster. WrenchFair's published fair-price range for this repair is $50–$600 parts and $100–$350 labor at independent shops.
WrenchFair rates P0644 a 3-of-5 DIY difficulty (“Data-line diagnosis needs a wiring diagram.”) with a “Diagnose soon” driveability rating: Drivable, but you cannot trust the gauges - fix soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
gauges dead or reading wrong
warning lights misbehaving
check engine light on
Likely causes
wiring fault in the serial data line
failed instrument cluster
corroded connector
internal module fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Visually inspect the wiring, connectors, and hoses around the component for damage, corrosion, chafing, loose pins, or disconnection. Tests: corroded connector
Check the data line for opens or shorts. Tests: wiring fault in the serial data line
Test with a known-good cluster if available. Tests: failed instrument cluster
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $600
Labor$100 – $350
Wiring repair or instrument cluster replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0644 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Data-line diagnosis needs a wiring diagram.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →