Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe car may not start until programming is complete.
Your engine computer does not recognize any keys - they were never programmed to it, usually after a computer replacement. A dealer or locksmith must program your keys to it.
Key facts
P0633 means immobilizer Key Not Programmed - ECM/PCM. Your engine computer does not recognize any keys - they were never programmed to it, usually after a computer replacement. A dealer or locksmith must program your keys to it. WrenchFair's published fair-price range for this repair is $0–$100 parts and $100–$250 labor at independent shops.
WrenchFair rates P0633 a 4-of-5 DIY difficulty (“Dealer or specialist programming required.”) with a “Diagnose soon” driveability rating: The car may not start until programming is complete. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
engine may not start
odometer reading dashes (P0632)
Likely causes
replacement module with no keys learned
lost key data
wrong keys
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 2 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Have a dealer or qualified specialist program the module with the correct VIN/mileage/keys. Tests: replacement module with no keys learned
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $100
Labor$100 – $250
Module programming. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0633 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Dealer or specialist programming required.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →