Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe car may not start - diagnose before you are stranded.
The relay that engages your starter has an electrical fault. Usually the engine will not crank. Swap the relay first - it is the cheapest part in the chain - then check the fuse and wiring.
Key facts
P0617 means starter Relay A Circuit High. The relay that engages your starter has an electrical fault. Usually the engine will not crank. Swap the relay first - it is the cheapest part in the chain - then check the fuse and wiring. WrenchFair's published fair-price range for this repair is $15–$60 parts and $50–$150 labor at independent shops.
WrenchFair rates P0617 a 1-of-5 DIY difficulty (“Relay swap test is the first and easiest step.”) with a “Diagnose soon” driveability rating: The car may not start - diagnose before you are stranded. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
engine will not crank
clicking but no crank
intermittent no-crank
check engine light on
Likely causes
failed starter relay
blown fuse
open or shorted wiring
faulty ignition switch signal
corroded relay socket
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Check the related fuses and relays before condemning any part - an open fuse is a cheap fix.
Swap the starter relay with an identical one and retest. Tests: failed starter relay
Check for the start signal at the relay when cranking.
Inspect the relay socket for corrosion.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $60
Labor$50 – $150
Starter relay replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0617 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
1 of 5 — Relay swap test is the first and easiest step.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →