Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeOnly the distance adjustment is affected; basic cruise still works.
The button that adjusts your adaptive cruise following distance (increase) is not signaling properly. Usually worn buttons or the clockspring - the coiled wire reel in the steering column.
Key facts
P056A means cruise Control Increase Distance Signal. The button that adjusts your adaptive cruise following distance (increase) is not signaling properly. Usually worn buttons or the clockspring - the coiled wire reel in the steering column. WrenchFair's published fair-price range for this repair is $50–$300 parts and $100–$300 labor at independent shops.
WrenchFair rates P056A a 2-of-5 DIY difficulty (“Button and clockspring testing; airbag precautions for the clockspring.”) with a “Drive safe” driveability rating: Only the distance adjustment is affected; basic cruise still works. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
cannot adjust following distance
check engine light on
Likely causes
worn distance button
stuck button
failing clockspring
wiring fault in the steering column
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Test the button with live data while pressing it.
Check whether other steering-wheel controls also fail - that points to the clockspring. Tests: failing clockspring
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $300
Labor$100 – $300
Cruise switch or clockspring replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P056A ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Button and clockspring testing; airbag precautions for the clockspring.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →