Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonIf the pedal is hard, drive carefully and fix promptly - braking performance is reduced.
A sensor watches the vacuum in your brake booster, and its signal is wrong. If the pedal feels hard, the vacuum may genuinely be low - check for leaks or a dead vacuum pump, because that is a safety issue. If the pedal feels normal, the sensor or its wiring is likely lying.
Key facts
P0557 means brake Booster Pressure Sensor Circuit Low. A sensor watches the vacuum in your brake booster, and its signal is wrong. If the pedal feels hard, the vacuum may genuinely be low - check for leaks or a dead vacuum pump, because that is a safety issue. If the pedal feels normal, the sensor or its wiring is likely lying. WrenchFair's published fair-price range for this repair is $40–$200 parts and $75–$250 labor at independent shops.
WrenchFair rates P0557 a 2-of-5 DIY difficulty (“Sensor testing is easy; verify actual booster vacuum with a gauge.”) with a “Diagnose soon” driveability rating: If the pedal is hard, drive carefully and fix promptly - braking performance is reduced. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
hard brake pedal (if vacuum truly low)
longer stopping distances
hissing when braking
check engine light on
Likely causes
failed brake booster pressure sensor
vacuum leak in the booster hose
failed vacuum pump
wiring fault
failed brake booster
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Check actual booster vacuum with a gauge and compare with the sensor reading. Tests: failed brake booster pressure sensor
Inspect the booster hose and check valve. Tests: vacuum leak in the booster hose
Test the sensor circuit; replace the sensor if vacuum is good but the reading is wrong.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $200
Labor$75 – $250
Brake booster pressure sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0557 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Sensor testing is easy; verify actual booster vacuum with a gauge.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →