P0556

P0556 on a 2018–2022 GMC Terrain: Brake Booster Pressure Sensor Circuit Range/Performance

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.
For your specific vehicle: P0556 on a 2018–2022 GMC Terrain

DIY difficulty 2/5

A sensor watches the vacuum in your brake booster, and its signal is wrong. If the pedal feels hard, the vacuum may genuinely be low - check for leaks or a dead vacuum pump, because that is a safety issue. If the pedal feels normal, the sensor or its wiring is likely lying.

Key facts

☑ Before you buy parts — check these first:
On your 2018–2022 GMC Terrain (1.5L Turbo LYX, 2.0L Turbo LTG) — Hard brake pedal / vacuum pump shatter: Owner-verified
Pump sits on the engine and is a bolt-on replacement; check any hard-pedal complaint for this failure before spending on brakes or boosters. If metal shards got into the engine, that is a much bigger job.
Do this test first: Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
→ Passes: that cause is ruled out — run the next test in the diagnostic path below.
→ Fails: fix what failed — that’s your cause. Clear the code and re-test before buying anything else.
No owner fix reports yet for P0556 on the 2018–2022 GMC Terrain — but the community-sourced Hard brake pedal / vacuum pump shatter note above covers an owner-reported fix.
Fixed yours? Report it — you'll help the next owner.

Torque specs

Tips

Sources: recall coverage (lawsuit) · owner repair story · owner DIY video · NHTSA complaint record

Typical difficulty: Moderate — based on 265 code guides for the brake repair area (an area-level estimate, not this exact job).

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

No owner reports yet

Symptoms

Likely causes

What usually pays the bill on this car, most common first — but work the diagnostic path above cheapest-first. Test order and bill order aren’t the same thing.

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
  2. Check actual booster vacuum with a gauge and compare with the sensor reading. Tests: failed brake booster pressure sensor
  3. Inspect the booster hose and check valve. Tests: vacuum leak in the booster hose
  4. Test the sensor circuit; replace the sensor if vacuum is good but the reading is wrong.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Most likely job on your 2018–2022 GMC Terrain: Hard brake pedal / vacuum pump shatter — test first, then buy for this job.
The price range below is a national planning range for P0556 on this vehicle — not a quote: it spans the common job at the low end to the expensive fork at the high end. 0 owner invoices on this generation — treat these as planning numbers.
If a shop quote lands near the top of the range, that’s fork money, not the common job — ask which test failed before authorizing it.

Typical price range

Parts$40 – $200
Labor$75 – $250

Brake booster pressure sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0556 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Sensor testing is easy; verify actual booster vacuum with a gauge.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →