Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe car may leave you stranded - diagnose before it becomes a permanent no-crank.
The signal that says 'start the engine now' is not getting through properly. Usually the car will not crank or cranks intermittently. Check the ignition switch or start button circuit, the wiring, and the starter relay.
Key facts
P0512 means starter Request Circuit. The signal that says 'start the engine now' is not getting through properly. Usually the car will not crank or cranks intermittently. Check the ignition switch or start button circuit, the wiring, and the starter relay. WrenchFair's published fair-price range for this repair is $30–$200 parts and $75–$200 labor at independent shops.
WrenchFair rates P0512 a 2-of-5 DIY difficulty (“Circuit tracing with a test light; the relay is the easy check.”) with a “Diagnose soon” driveability rating: The car may leave you stranded - diagnose before it becomes a permanent no-crank. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
engine will not crank
intermittent no-crank
check engine light on
Likely causes
faulty ignition switch or start button
open or shorted wiring in the request circuit
failed starter relay
corroded connector
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Check the related fuses and relays before condemning any part - an open fuse is a cheap fix.
Check whether the starter relay clicks when the request is made. Tests: failed starter relay
Trace the request signal from the switch to the computer with a test light. Tests: open or shorted wiring in the request circuit
Inspect connectors for corrosion.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$30 – $200
Labor$75 – $200
Ignition switch or starter relay replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0512 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Circuit tracing with a test light; the relay is the easy check.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →