Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe car still brakes but with much higher pedal effort and longer stops - drive carefully and fix promptly.
Your power brakes need vacuum to work, and the computer says there is not enough. The brake pedal will feel hard and the car will not stop as quickly. This is a safety problem - check for vacuum leaks or a dead vacuum pump and fix it promptly.
Key facts
P050F means brake Assist Vacuum Too Low. Your power brakes need vacuum to work, and the computer says there is not enough. The brake pedal will feel hard and the car will not stop as quickly. This is a safety problem - check for vacuum leaks or a dead vacuum pump and fix it promptly. WrenchFair's published fair-price range for this repair is $30–$400 parts and $100–$350 labor at independent shops.
WrenchFair rates P050F a 3-of-5 DIY difficulty (“Vacuum testing; the booster is labor-intensive if it needs replacement.”) with a “Diagnose soon” driveability rating: The car still brakes but with much higher pedal effort and longer stops - drive carefully and fix promptly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
hard brake pedal
longer stopping distances
hissing noise when braking
check engine light on
Likely causes
vacuum leak in the brake booster hose
failed vacuum pump (common on turbo engines)
failed brake booster
failed vacuum sensor
wiring fault to the sensor
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
With the engine running, check vacuum at the booster with a gauge - low vacuum means a leak or pump problem. Tests: vacuum leak in the brake booster hose
Inspect the booster hose and check valve for cracks. Tests: vacuum leak in the brake booster hose
Test the vacuum pump if equipped. Tests: failed vacuum pump (common on turbo engines)
Verify the sensor reading against the gauge.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$30 – $400
Labor$100 – $350
Vacuum hose or vacuum pump replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P050F ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Vacuum testing; the booster is labor-intensive if it needs replacement.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →