Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable; fix before it becomes a cold no-start.
Your engine shakes or misfires on cold starts but smooths out when warm. Cold engines are picky - the usual suspects are worn spark plugs, a vacuum leak, carbon buildup, or a temperature sensor lying about how cold it is.
Key facts
P050D means cold Start Rough Idle. Your engine shakes or misfires on cold starts but smooths out when warm. Cold engines are picky - the usual suspects are worn spark plugs, a vacuum leak, carbon buildup, or a temperature sensor lying about how cold it is. WrenchFair's published fair-price range for this repair is $40–$300 parts and $75–$250 labor at independent shops.
WrenchFair rates P050D a 2-of-5 DIY difficulty (“Tune-up items first; temperature sensor reading when cold.”) with a “Diagnose soon” driveability rating: Drivable; fix before it becomes a cold no-start. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
shaking or misfiring on cold start
smooths out when warm
check engine light on
Likely causes
worn spark plugs or weak ignition coils
vacuum leak
carbon-fouled intake valves or throttle body
faulty engine coolant temperature sensor
dirty fuel injectors
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Check for misfire codes to identify the cylinder(s).
On a cold engine, verify the coolant temperature reading matches ambient. Tests: faulty engine coolant temperature sensor
Inspect spark plugs; check for vacuum leaks. Tests: worn spark plugs or weak ignition coils
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $300
Labor$75 – $250
Spark plug replacement or vacuum leak repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P050D ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Tune-up items first; temperature sensor reading when cold.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →