P045C: Exhaust Gas Recirculation B Control Circuit Low
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable; fix before emissions testing. A valve stuck open can cause stalling.
Your engine has a second EGR valve (B), and the computer found a problem with its control circuit. The computer tried to operate it and the electrical circuit did not behave. Check the wiring and solenoid first.
Key facts
P045C means exhaust Gas Recirculation B Control Circuit Low. Your engine has a second EGR valve (B), and the computer found a problem with its control circuit. The computer tried to operate it and the electrical circuit did not behave. Check the wiring and solenoid first. WrenchFair's published fair-price range for this repair is $80–$320 parts and $100–$250 labor at independent shops.
WrenchFair rates P045C a 2-of-5 DIY difficulty (“Solenoid and wiring tests; the valve is usually accessible.”) with a “Diagnose soon” driveability rating: Drivable; fix before emissions testing. A valve stuck open can cause stalling. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
rough idle
failed emissions test
often no driving symptoms
Likely causes
failed EGR B control solenoid
open or shorted wiring in the control circuit
corroded or loose connector
blown fuse feeding the circuit
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Visually inspect the wiring, connectors, and hoses around the component for damage, corrosion, chafing, loose pins, or disconnection. Tests: corroded or loose connector
Check the related fuses and relays before condemning any part - an open fuse is a cheap fix.
Test the EGR B solenoid for an open or short; compare with EGR A if both exist. Tests: failed EGR B control solenoid
Check power and ground at the solenoid while the computer commands it.
Suspect the PCM only after every wire and component test passes - module failure is rare.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $320
Labor$100 – $250
EGR B valve or solenoid replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P045C ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Solenoid and wiring tests; the valve is usually accessible.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →